Loading ...
Loading ...
Loading ...
TO REPLACE MOWE$1 O$ QVE BELT
REPLACE ONLY WITH THE BELTS SPECIFIED IN THIS
MANUAL
1_ Place Attachment Clutch Lever in "DISENGAGED" ..................
position (Fig, 25).
2. Turn Depth Adjustment Knob to lowest position, Move
Mower Lift Lever (Fig, 25) forward to lower Mower to its
lowest position,
3 Roll Belt off Engine PuIley (Fig 26).
4 Use 1/2" wrench to loosen two Nuts on R H Belt Guard.
Pull Belt off Pulley (Fig, 27)
5, Use 9/16" wrench to loosen Nut on L.H Idler Pulley, PuII
Belt off Pulley(Fig 27).
6. Slide belt from under spring
7. To replace Mower Drive Belt, reverse above procedure.
Make sure Drive Belt is ins{de Engine Pulley Belt Guides
TO REPLACE mOWER BELT
1. Remove mower from Tractor (See page 14)_
2. Remove Mower Drive Belt (See above)
3, Pull Belt towards rear of Mower at Tensioning Pulley,
Place a block between Tension Bracket and Spring Bracket.
Roll Belt off Tensioning Pulley (Fig. 28)
4. Roll Belt off all other pulleys_
ATTACHMENT CLUTCH LEVER
"DISENGAGED" POSITION
LIFT LEVER
"LOWEST" POSITION
SPRING
_j"
FIGURE 26
L.H IDLER
NUT PULLEY
MOWER DRIVE
BELT
FIGURE 27
MOWER BELT
BLOCK
FIGURE 25
TENSION
BRACKET
TENSIONING
PULLEY
J
FIGURE 28
- t3-
Loading ...
Loading ...
Loading ...