Loading ...
Loading ...
Loading ...
Cleaning and maintenance
200
4. Slide out and remove the light bulb.
5. Replace the light bulb with one of the
same type (40W).
6. Refit the cover. Make sure that the
shaped internal part of the glass (A) is
facing the door.
7. Press the cover completely down so that
it attaches perfectly to the bulb support.
What to do if...
The display is completely off:
• Check the mains power supply.
• Check that any circuit breakers upline of
the appliance supply line are in the
“ON” position.
The appliance does not heat up:
• Check whether ”Showroom (for
showrooms only)” or ”Demo mode (for
showrooms only)” mode has been set
(for further details see section ”Settings”).
The controls do not respond:
• Check whether ”Controls lock” mode
has been set (for further details see
section ”Settings”).
After the (pyrolytic) automatic cleaning
cycle it is not possible to select a function:
• Verify whether the door lock has
deactivated. If it has not, the oven has a
safety device that does not allow
functions to be selected while the door
lock is active. This is because the
temperature inside the oven is still too
high to permit any type of cooking.
Do not touch the halogen light
bulb directly with your fingers, but
wrap it in insulating material.
Loading ...
Loading ...
Loading ...