Briggs & Stratton 040684 Power Protect 10kW Home Standby Generator

Installation and Operation Manual - Page 45

For 040684.

PDF File Manual, 180 pages, Read Online | Download pdf file

040684 photo
Loading ...
Loading ...
Loading ...
45
Operation
Battery
The installer must supply a rechargeable 12 volt
DC starting battery. See Battery in Final Installation
Considerations in the installation manual.
With the battery installed, all wiring to transfer switch and
home generator completed, utility power supplied to the
automatic transfer switch, and the unit in AUTO mode, the
battery receives a trickle charge while the engine is not
running. The trickle charge cannot be used to recharge a
battery that is completely discharged.
NOTICE A battery booster should never be used to quick
charge a low battery.
Engine Oil
The engine is shipped from the factory pre-run and filled
with full synthetic oil (API SJ/CF 5W-30). This allows for
system operation in a wide range of temperature and
climate conditions. Before starting the engine, check oil
level as described in Maintenance.
NOTICE Any attempt to crank or start the engine before it has
been properly serviced with the recommended oil will result in
equipment failure.
Damage to equipment resulting from failure to follow this
instruction will void engine and generator warranty.
Important Owner’s Considerations
WARNING Battery posts, terminals and related accessories
contain lead and lead compounds, chemicals known to the
State of California to cause cancer and reproductive harm. Wash
hands after handling.
15 Amp Fuse
The generator’s 15 Amp fuse is critical to correct system
operation. The 15 Amp fuse was removed at the factory.
Your installer will ensure the fuse is properly installed upon
completion of the installation.
Not for
Reproduction
Loading ...
Loading ...
Loading ...