Loading ...
Loading ...
Loading ...
30
Advanced Settings Screen
Advanced setting parameters are preset at the factory for a typical installation. To view Advanced Settings items and/or to
change items, follow the instructions listed below.
NOTICE Advanced settings are critical to the operation of the unit. Careful consideration should be taken when
working in the Advanced Settings menu. Exercise caution when selecting and verifying parameters for the
generator and region where the generator is being operated. Confirm all settings before operating the generator
for the first time.
For advanced menu items, press and hold the left arrow, right arrow, and escape key
ok
ok
ok
for 3 seconds or see pg. 29
for additional key sequence. Follow the prompts as outlined below.
NOTICE In the Advanced Setting menu, a three button access code (left arrow, right arrow, and escape key
ok
ok
ok
must be pressed once to enter the menu and again to change any setting. After each confirmation of a setting, the selection
will display solid for 2 seconds before moving to the next program item.
SOFTWARE VERSION
DISPLAYED
E-Governor
Check
KW
HZ
PHASE
VOLTS
KW
FLASHING
50/60 Hz
FLASHING
SINGLE
or
THREE
FLASHING
VOLTS
FLASHING
Stepper Motor
will sweep through throttle
range for dealer
visual verificatio
or
or
or
or
or
or
or
or
or
*ONLY APPLICABLE ON SOME MODELS
Not for
Reproduction
Loading ...
Loading ...
Loading ...