Loading ...
Loading ...
Loading ...
using your refrigerator 19
TWIST ICE & SERVE
To use, remove the tray, fill with water and place back in
the freezer. Once ice has formed (approximately 3 hours)
simply twist the knob at the front clockwise until the ice
drops into the bin below.
ICE & WATER DISPENSER FEATURES
The ice and water dispenser conveniently dispenses cool,
filtered water and ice cubes or crushed ice. To operate the
ice dispenser, select an ice option using the electronic
display and press glass against ice dispensing paddle.
To stop dispensing ice, pull the glass away from the ice
dispensingpaddle.Removetheglassfromthedispenser
paddle when it is approximately half full. Ice already in the
chute may cause the glass to overflow or back up into the
chute and cause a blockage (refer to troubleshooting guide
on how to unblock the ice chute).
ice paddle
water paddle
drip tray
To operate the water dispenser, press a glass against the
dispensing paddle. To stop dispensing water, pull the
glass away from the water dispensing paddle. As the
ice and water cut-off is not instant, leave glass under the
dispenser until the ice and water has completely stopped
to avoid spills. A drip tray located at the base of the
dispenser (see diagram above) will catch small spills and
allow them to evaporate. The drip tray is removable and
dishwasher safe. Opening the freezer door will de-activate
the ice dispenser.
CAUTION
Do not pour water or excess cubes into the drip tray
because it is not connected to a drain.
WARNING
Do not use fragile glass for dispensing water or ice – risk of
injury from broken glass.
BOTTLE FILLING FUNCTION
The Aqua Direct bottle filling function facilitates the flow
of water directly into the mouth of a bottle, minimising
splashing and spillage. Water flows from the water
dispensing nozzle located on the underside of the ice
and water dispenser
water
dispenser
To use this function, place the mouth of the bottle over the
water dispensing nozzle.
Once the mouth of the bottle is completely over the water
dispensing nozzle (see diagram below) gently push bottle
up to dispense water and fill bottle. Once the bottle
is full, remove the bottle and the flow of water will
stop automatically
ICE & WATER FEATURES (WHERE FITTED)
Loading ...
Loading ...
Loading ...