Bowflex BXT8Ji Treadmill

User Manual - Page 57

For BXT8JI TREADMILL.

PDF File Manual, 68 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Assembly / Owner’s Manual
57
Condition/Problem Things to Check Solution
No display/partial display/unit
will not turn on
Check electrical (wall) outlet Make sure unit is plugged into a functioning wall outlet. Test the outlet with a
known functioning device such as a lamp.
Check connection at front of unit Connection should be secure and undamaged. Replace power cord or con-
nection at unit if either are damaged.
Check data cable integrity All wires in cable should be intact. If any are visibly crimped or cut, replace
cable.
Check data cable connections/
orientation
Be sure cable is connected securely and oriented properly. Small latch on
connector should line up and snap into place.
Check console display for
damage
Check for visual sign that console display is cracked or otherwise damaged.
Replace Console if damaged.
Console Display If Console only has partial display and all connections are ne, replace the
Console.
If the above steps do not resolve the problem, contact Customer Service (if
inside US/Canada) or your local distributor (if outside US/Canada).
Unit operates but Contact HR
not displayed
Sensor grip Be sure hands are centered on HR sensors. Hands must be kept still with
relatively equal pressure applied to each side.
Dry or calloused hands Sensors may have difculty with dried out or calloused hands. A conductive
electrode cream (heart rate cream) can help make better conduct. These are
available on the web or at medical or some larger tness stores.
If tests reveal no other issues, contact Customer Service (if inside US/Cana-
da) or your local distributor (if outside US/Canada).
Unit operates but Telemetric HR
not displayed
Chest Strap Strap should be “POLAR
®
” compatible and uncoded. Make sure strap is
directly against skin and contact area is wet. Make sure the transmitter has
the curve oriented upward.
Chest Strap Batteries If strap has replaceable batteries, install new batteries.
Check User Prole Select the Edit User Prole option for the User Prole. Go to the WIRELESS
HR setting and make sure that the current value is set to ON.
Interference Try moving unit away from sources of interference (TV, Microwave, etc).
Replace Chest Strap If interference is eliminated and HR does not function, replace strap.
Replace Console If HR still does not function, contact Customer Service (if inside US/Canada)
or your local distributor (if outside US/Canada).
Speed display is not accurate Display set to wrong unit of
measure. (English/Metric)
Change display to show correct units.
Console shuts off (enters sleep
mode) while in use
Check electrical (wall) outlet Make sure unit is plugged into a functioning wall outlet. Test the outlet with a
known functioning device such as a lamp.
Check connection at front of unit Connection should be secure and undamaged. Replace power cord or con-
nection at unit if either are damaged.
Check data cable integrity All wires in the cable should be intact. If any are cut or crimped, replace
cable.
Check data cable connections/
orientation
Be sure cable is connected securely and oriented properly. Small latch on
connector should line up and snap into place.
Reset machine Unplug unit from electrical outlet for 3 minutes. Reconnect to outlet.
If the above steps do not resolve the problem, contact Customer Service (if
inside US/Canada) or your local distributor (if outside US/Canada).
Console continuously cycles
through program screens
Console is in demonstration
mode
Hold down the PAUSE/STOP button and Decrease button together for 3
seconds.
Troubleshooting
Loading ...
Loading ...
Loading ...