Loading ...
Loading ...
Loading ...
Assembly / Owner’s Manual
42
Quick Start ( Manual ) Program
The Quick Start ( Manual ) program lets you start a workout without entering any information.
During a Manual Workout, each column represents a 2 minute time period. The active column will advance across the screen every 2 minutes. If
the workout lasts for more than 32 minutes, the active column is xed on the farthest column on the right and pushes the previous columns off the
display.
1. Stand on the Side Foot Support Platforms.
2. Push the User button to select the correct User prole. If you do not have a User prole set up, you can select a User prole that has no cus-
tomized data (default values only).
3. Push the START button to start the Manual program.
Note: The Safety Key must be installed for a workout to begin. If not installed, the Console will display ” + SAFETY KEY“. The Console will display
“RAMPING UP” as the Walking Belt gets up to speed.
4. To change the Incline or Speed level, push the appropriate Increase or Decrease buttons. The time will count up from 00:00.
Note: The maximum time for a Quick Start workout is 9 hours, 59 minutes and 59 seconds (9:59:59).
5. When done with your workout, push PAUSE/STOP to pause the workout. Push PAUSE/STOP again to end the workout.
Note: The workout results are recorded to the current User Profile.
User Proles
The Console lets you store and use 4 User profiles. The User profiles automatically record the workout results for each workout, and allow the workout
data to be reviewed.
The User profile stores the following data:
• Name—up to 13 characters
• Weight
• Height
• Age
• Gender
• Lap Distance
• Scan
• Value (Customized Workout Display)
Select a User Prole
Every workout is saved to a User Prole. Be sure to select the proper User Prole before starting a workout. The last User that completed a workout
will be the default user.
User Proles are assigned the default values until they are customized by editing. Be sure to edit the User Prole for more accurate calorie and heart
rate information.
Edit User Prole
1. From the Power-Up Mode screen, push the User buttons to select one of the User Proles.
2. Push the OK button to select the User Profile.
3. The Console display shows the GOAL TRACK prompt. Push the Increase() button.
4. The Console display shows the EDIT prompt and the current User Profile name. Push OK to start the Edit User Prole option.
To exit the User Prole options, push the PAUSE/STOP button and the console will go back to the Power-Up Mode screen.
5. The Console display shows the NAME prompt and the current User Profile name.
Note: The User name will be blank if this is the first edit. The name of a User Profile is limited to 13 characters.
The currently active segment will flash. Use the Increase/Decrease buttons to move through the alphabet and blank space (found between A and
Z). To set each segment, use the Left() or Right() buttons to shift between segments.
Loading ...
Loading ...
Loading ...