Loading ...
Loading ...
Loading ...
Troubleshooting
If you encounter a problem with the gas oven, first check the table below and try the
suggestions.
Checkpoints
Gas safety
z
There is a gas leak. The
surface burner knob is not
in the OFF position and the
burner is not lit.
Clear the room, building, or area of all
occupants.
Immediately call your gas supplier
from a neighbor's phone. Do not call
from your phone. It is electrical and
could cause a spark that could ignite
the gas. Follow the gas supplier's
instructions.
If you cannot reach your gas supplier,
call the fire department.
Surface burner
All burners do not The power cord is not
light, plugged into the electrical
outlet.
A fuse in your home may
be blown or the circuit
breaker tripped.
The gas supply is not
properly connected or
turned on.
Surface burners do The control knob is not set
properly.
The burner caps are not in
place.
The burner base is
misaligned.
Make sure the electrical plug is
plugged into a live, properly grounded
outlet.
Replace the fuse or reset the circuit
breaker.
See the Installation Instructions that
came with your range.
Push in the control knob and turn it to
the LITE position.
Clean the electrodes.
Put the burner cap on the burner head.
Align the burner base.
72 English
NXSgI7750SS DG6g 00623A 00 ENindd 72
Loading ...
Loading ...
Loading ...