Loading ...
Loading ...
Loading ...
Maintenance
Burner grates and components
Turn off all surface burners, and make sure they a
E
r
re all cooled down.
Remove the burner grates.
Remove the burner caps from the burner
heads.
3, Remove the burner heads from the valve
manifolds to reveal the starter electrodes.
4, Clean all removable grates and burner
components in warm, soapy water. Do not
use steel-wool pads or abrasive cleaners.
5, Rinse and dry grates and burner
components thoroughly.
\
\
\
\
©
Return the burner heads to their positions
on top of the manifold valves. Make sure
a starter electrode is inserted through the
hole in each burner head.
7, Return the burner caps to their positions
on top of burner heads. To ensure proper
and safe operation, make sure the burner
caps lie fiat on top of the burner heads.
8, Reinstall the burner grates in their
respective positions.
9o Turn on each burner and check if it
operates properly. After verifying that a
burner operates normally, turn it off.
NOTES
• Check the right position of the Double ring
burner.
• The precise simmer burner(RR) cap and
the inner Double ring burner (RF) cap are
interchangeable.
A CAUTION
• The starter electrodes are not removable. Do not attempt to remove them by force.
• Make sure all burner components (heads and caps) are reinstalled properly. They are
stable and rest fiat when installed properly.
• To avoid chipping, do not bang grates and caps against each other or hard surfaces such
as cast iron cookware.
66 English
NXSgI7750SS DG6g 00623A 00 EN:ndd 66
Loading ...
Loading ...
Loading ...