Loading ...
Loading ...
Loading ...
82 GETTING TO KNOW YOUR VEHICLE
4. Making sure the lift assist mechanism is in the “lock”
position, lift the soft top into the rear of the vehicle
with the side links pointing toward the front. Lower
the lift assist mechanisms onto its retainers on both
sides (on the inside of the sport bar).
Step Four
Step Four
5. Using the provided #40 Torx head driver and ratchet,
tighten the Torx screws by turning them clockwise.
Secure them until they are snug (refer to the following
table for recommended torque specifications), being
careful not to cross-thread the screws or overtighten.
Repeat on the opposite side.
Step Five
Torque
Specification For
Torx Screw
Maximum Minimum
119.5 in-lb 150.5 in-lb 106.2 in-lb
13.5 N·m 17.0 N·m 12.0 N·m
CAUTION!
Failure to follow the next steps could result in damage
to the Soft Top or vehicle.
1 — Lock Position
2 — Torx Head Screw
3 — Torx Head Screw
Torque
Specification For
Torx Screws
Maximum Minimum
119.5 in-lb 150.5 in-lb 106.2 in-lb
13.5 N·m 17.0 N·m 12.0 N·m
CAUTION!
Do not overtighten the screws. You can strip the screws
if they are overtightened.
23_JL_OM_EN_USC_t.book Page 82
Loading ...
Loading ...
Loading ...