Loading ...
Loading ...
Loading ...
112 GETTING TO KNOW YOUR INSTRUMENT PANEL
INSTRUMENT CLUSTER DISPLAY
S
ELECTABLE ITEMS
The instrument cluster display can be used to view the
following main menu items:
NOTE:
Depending on the vehicles options, feature settings may
vary.
Speedometer
Push and release the
up or down arrow button
until the speedometer menu icon is displayed in the
instrument cluster display. Push and release the
OK
button to toggle between MPH and km/h.
Vehicle Info
Push and release the
up or down arrow button
until the Vehicle Info menu icon is displayed in the
instrument cluster display. Push and release the
left or
right arrow button to scroll through the information
submenus and push and release the
OK button to select
or reset the resettable submenus.
Off Road
Push and release the
up or down arrow button
until the Off Road menu icon is displayed in the instrument
cluster display. Push and release the
left or right
arrow button to scroll through the information submenus.
Drivetrain
Front Wheel Angle: displays the graphical and
numerical value of calculated average front wheel
angle from the steering wheel orientation.
Transfer Case Lock Status: displays “Lock”
graphic only during 4WD High, 4WD High Part
Time, 4WD Low status.
Axle Lock And Sway Bar Status (If Equipped):
displays front and rear or rear only axle locker
graphic, and sway bar connection graphic with text
message (connected or disconnected).
Pitch And Roll
Displays the pitch and roll of the vehicle in the
graphic with the angle number on the screen.
NOTE:
When vehicle speed becomes too high to display the pitch
and roll, “- -” will display in place of the numbers, and the
graphic will be greyed out. A message indicating the
necessary speed for the feature to become available will
also display.
Driver Assist — If Equipped
The Driver Assist menu displays the status of the ACC
systems.
Push and release the
up or down arrow button
until the Driver Assist menu is displayed in the instrument
cluster display.
Adaptive Cruise Control (ACC) Feature — If Equipped
The instrument cluster display displays the current ACC
system settings. The information displayed depends on
ACC system status.
Push the ACC ON/OFF button (located on the steering
wheel) until one of the following displays in the instrument
cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read “Adaptive
Cruise Control Off.”
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed setting has
not been selected, the display will read “Adaptive Cruise
Control Ready.”
Speedometer
Driver Assist — If
Equipped
Stop/Start
Vehicle Info Fuel Economy Audio
Off Road Trip Info Messages
Screen Setup
Phone Call
Status — If
Equipped
Tire Pressure
Single Gauge
Submenu — If
Equipped
Critical Level
Logic — If
Equipped
Oil Life
Diesel Exhaust
Fluid Level — If
Equipped
Coolant
Temperature
Oil Pressure Oil Temperature
Transmission
Temperature —
Automatic
Transmission
Only
Battery Voltage
23_JL_OM_EN_USC_t.book Page 112
Loading ...
Loading ...
Loading ...