Loading ...
Loading ...
Loading ...
72 GETTING TO KNOW YOUR VEHICLE
NOTE:
The vehicle can be driven in the Sunrider® position
with the rear window and quarter panel assemblies
fully installed or completely removed.
The rear window and rear quarter windows
must be
removed before fully lowering the soft top to prevent
damage to the top. Clean the side and rear windows
before removal to assist in preventing scratching
during removal of the soft top. If the plastic retainers
are difficult to operate due to road dust, etc., clean
them with a mild soap solution and a small brush.
Cleaning products are available through an authorized
dealer.
Removing The Soft Top Windows
NOTE:
Before fully lowering the soft top, the rear window and rear
quarter windows
must be removed.
Remove The Rear Window:
1. With the swing gate open, remove the rear window’s
plastic retainers from the lower right and left
corners.
Step One
2. Grab the swing gate bar, rotate it outward and
upward releasing it from both the right and left
retainers.
Step Two (Left Side Shown)
3. While holding the window in place, slide the swing
gate bar to the left separating it from the rear window.
Store in soft window bag (if equipped), or a safe
location.
Step Three
4. Remove the plastic retainers from both quarter
window pillars.
Step Four
23_JL_OM_EN_USC_t.book Page 72
Loading ...
Loading ...
Loading ...