Loading ...
Loading ...
Loading ...
39
Software upgrade
Things to do before performing software upgrade:
● Make sure connect with power supply or insert batteries with the amount of power remaining
for proper operation during software upgrade.
● Disable all setup (including Sleep, Alarm and Timer Record setup) to prevent activation during
software upgrade, which in turn may cause software upgrade failure.
● If software upgrade failure occurs, upgrade cannot be performed anymore. It is necessary to
send back to Sangean Service department for repair. Before returning the repaired unit, please
contact:
for detailed return instruction. Please note that free repair service
or free of charge replacement do not cover issues regarding software upgrade failure.
Following the procedures below:
1. Download upgrade les/ rmware(DAR-101.rat) from the link below:
http://www.sangean.com/support/download.asp
(for the US users)
http://www.sangean.eu/support/download.html
(for European users)
http://sg.sangean.com.tw/support/download.asp
(for users other than these two areas)
Extract les of ‘nemo.bin’ and ‘Boot.sei’ and copy these les into SD card.
2. Connect power supply or insert batteries. To prevent from power failure, you can connect both
main power adaptor and insert batteries.
3. Insert SD card to your DAR-101.
4. Press the Power button to turn on the radio.
5. Rotate the Volume control to adjust the volume to an appropriate level, so that you can hear
the beep tone when software upgrade complete.
Loading ...
Loading ...