Loading ...
Loading ...
Loading ...
17
2. Adjust the recording level
● This function allows you to adjust the volume of recording input. Press and hold the REC button
[ ] to begin recording and the record indicator illuminated.
When the input is too high, the PEAK indicator on the top panel near REC button ashes red.
In this case, rotate the REC LEVEL rotary in anti-clockwise direction till the PEAK indicator
stops ashing.
● In addition, you can adjust the left/right balance of the recording input. When recording, the
input signal is shown by the level meters on the display and the level of the input signal from
both left and right channel can be monitored.
If the level meters for the right channel (indicating as R on the display) moves to the right of the
center on the scale, rotate the balance control anticlockwise to increases the recording level of
left channel and vice versa.
However, normally, the cursor of balance control is highly suggested to place in the center click
to gain the same recording level from both channels.
Loading ...
Loading ...
Loading ...