Loading ...
Loading ...
Loading ...
BASE - Supportsdrillpress.For additionalstability,
holesare providedin base toboltdrillpressto floor.
(See "Specific Safety Instruction for DrillPresses.")
BACKUP MATERIAL - Apiece ofscrapwood placed
betweenthe workpieceand table. The backupbeard
preventswood in the workpiecefrom splintedngwhen
the drillpassesthroughthe backsideoftheworkpiece.It
alsopreventsdrillingintothe table top.
BELT GUARD ASSEMBLY - Covers the pulleysand
beltduringoperationof the drillpress.
BELT TENSION - Refer to the"Assembly" Section,
"Installingand Tensioning Belt.".
BELT TENSION HANDLE - Turn thehandle clockwise
toapply tensionto belt, turnthe handle counterclockwise
to release belttension.
BELT TENSION LOCK KNOBS - Tighteningthe knobs
locksthemotorbracket supportand the belttension
handle,maintainingcorrectbeltdistanceand tension.
BEVEL SCALE - Shows degree of table tilt for bevel
operaions. The scale ismounted on the side ofthe arm.
CHUCK - Holdsdrill bit or otherrecommended
accessoryto performdesired operations.
CHUCK KEY - A self-ejectingchuckkey whichwillpop
outofthe chuckwhen you let go of it.This actionis
designedto help preventthrowingofthe chuck keyfrom
thechuckwhen the peer isturned ON. Do not useany
otherkey as a substitute; ordera newone if hamaged or
lost.
COLUMN - Connects the head, table, and base on a
one piecetube for easy alignment and movement.
COLUMN COLLAR - Holds the rack to the column.
Rack remains movablein the collarto permit table
support movements.
COLUMN SUPPORT - Supports the column, guides the
rack and providesmountingholesfor columnto base.
DEPTH SCALE STOP NUTS - Lock the spindle to the
selected depth.
DEPTH SCALE - Indicates depth of hole being drilled.
DRILL BIT - The cutting tool used in the drill press to
make holes in a workpiece.
DRILL ON/OFF SWITCH - Has lockingfeature. This
feature is intended to help preventunauthorizedand
possible hazardous use by children and others. Insert
the key into the switch to turn the drill press on.
DRILLING SPEED - Changed by placingthe belt in any
of the steps(grooves) inthe pulleys.See the Spindle
Speed Chart insidebeltguard.
FEED HANDLE - Moves the chuckup or down.IF
necessary, one ortwo ofthe handles may be removed
whenevertheworkpiece isof suchunusualshape thatit
interfereswith thehandles.
FENCE - Attaches tothe table to alignthe workpieceor
for fast repetitivedrilling.Removable. Removefence
when itinterfereswith otherdrillpress accessories.
HEAD LOCKS - Locks the head tothe column.
ALWAYS lockthe head in placewhile operatingthedrill
press.
RACK - Combines withgear mechanism to provide
easy elevationofthe table by thehandoperated table
crank.
REVOLUTION PER MINUTE (R.P.M.)- The numberof
turns completedbya spinningobjectin one minute.
SPINDLE SPEED - The RPM. ofthe spindle.
SPRING CAP - Adjusts quill spring tension.
TABLE SUPPORTS LOCK - Tighteninglocksthe table
supporttocolumn.Always haveit lockedin placewhile
operatingthe dirllpress.
TABLE - Provides a working surface to supportthe
workpiece.
TABLE ARM - Extends beyond the table supportfor
mounting and aligning the table.
TABEL BEVEL LOCK - Locks the table in anyposition
from 0° - 45°
TABLE CRANK - Elevates and lowers the table. Turn
clockwise to elevate the table. Support lock must be
released before operating the crank.
TABLE LOCK - Locksthe table after it is rotated to
variouspositions.
TABLE SUPPORT - Rides on the column to supportthe
table arm and table.
THREADED DRAIN (518")- Attach a 5/8" (pipe
threaded) metal pipe to the threaded opening for
drainingexcees oilintocontainer.Fora non-draining
surfaceattacha threaded metal plug.Pipe and plugnot .
included.
WORKPIECE - Material being drilled.
Loading ...
Loading ...
Loading ...