Loading ...
Loading ...
GENERAL SAFETYINSTRUCTIONS 14.
BEFORE USING THE DRILL PRESS
Safety is a combination of common sense, staying alert
and knowing howto use your ddll press. 15.
REMOVE ADJUSTING KEYS AND WRENCHES.
Form the habitof checking to see that keys and
adjusting wrenches are removed from the tool before
turning =ON".
NEVER LEAVETOOL RUNNING UNATFENDED.
TURN THE POWER "OFF". Don't leave the tooluntil
itcomes to a complete stop.
To avoid mistakes that could cause sedous injury, do not 16. NEVER STAND ON TOOL Sedous injurycould occur
plug the drillpress in until you have read and understood ifthe toolisUppedor ifthe cuffingtoolis unintentionally
the following: contacted.
1. READ and become familiar with this entire instruction
manual.LEARN thetool'sapplications,limitstJons,and
possiblehazards.
2. KEEP GUARDS IN PLACE and in workingorder.
3. DON'T USE IN A DANGEROUS ENVIRONMENT.
Don't use power tools in damp or wet locations, or
expose them to rain. Keep work area well lighted.
4. DO NOT use powertoolsin the presence offlammable
liquidsor gases.
5. KEEP WORK AREA CLEAN. Cluttered areas and
benches inviteaccidents.
6. KEEP CHILDREN AWAY.AUvisitorsshouldbe keptat
a safe distance from the work area.
7. DON'T FORCE THE TOOL. It Willdo the job better
and safer at the rate for which it was designed.
8. USETHE RIGHTTOOL. Don't force tool or the
attachment to do a job for which it was not designed.
.
WEAR PROPER APPAREL DO NOT wear loose
clothing, gloves, neckties, rings, bracelets, or other
_lowelrywhich may get caught in moving parts.
onslip footwear is recommended. Wear protective
hair covering to contain long hair.
10. WEAR A FACE MASK OR DUST MASK.
Drillingoperation produces dust.
11. DISCONNECTTOOLS before servicing, and when
changing accessories, such as blades, bits, ct_ttem,
and the like.
12. REDUCETHE RISK OF UNINTENTIONAL STARTING.
Make sure the switch is in "OFF"position before
plugging in.
13. USE RECOMMENDED ACCESSORIES. Consult the
owner's manual for the recommended accessories.
The use of improper accessories may cause risk of
injury to persons.
17. DON'T OVERREACH. Keep proper footing and
balance at all times.
18. MAINTAIN TOOLS WITH CARE. Keep toolssharp
and clean for best and safest performance. Follow
instructionsfor lubricating and changing accessories,
19. CHECK FOR DAMAGED PARrs. Beforefurther useof
the tool,a guard or otherpert that is damaged should
be carefully checked to determine that it willoperate
propertyand perform its intended function.Check for
alignmentof movingparts,bindingof moving parts,
breakage of parts, mounting,and any otherconditions
that may affect itsoperation.A guard or other part that
is damaged shouldbe properly repairedor replaced.
20. MAKEWORKSHOP laD PROOF withpadlocks,master
switches,or by removing starter keys.
21.
22.
DO NOT operatethe toolif you are underthe influence
of any drugs,alcohol or medication that could affect
your abilityto use the tool properly.
Dust generated from certain materials can be
hazardous to your health. Always operate the drill
press in a well-ventilated area and provide for proper
dust removal. Use dust coflectionsystems whenever
possible.
23. ALWAYS WEAR EYE
PROTECTION. Any ddll press
can throw foreignobjects into
the eyes which could cause
permanent eye damage.
ALWAYSwearSafety Goggles
(not glasses) thatcomplywith
ANSI safety standard Z87.1. Everyday eyeglasses
have only impact-resistant lenses. They ARE NOT
safety glasses.Safety Goggles are available at Seam.
NOTE: Glasses or goggles not in compliance with
ANSI Z87.1 could seriouslyhurtyou when they break.
SAVE THESE INSTRUCTIONS
3
Loading ...
Loading ...
Loading ...