Loading ...
Loading ...
Loading ...
Cleaning the Shuttle Race
This area must be kept free of dust, lint and
occasional tangled thread. Clean the shuttle race area
about every three months.
• Cleaning the shuttle area
_t_ Bobbin case
Levers
Shuttle race cover
Shuttle
Shuttle race
Center pin on the shuttle
Raise the needle bar to its highest point and remove the
bobbin case_.
Push shuttle race levers (_ aside. Lift shuttle race
cover (_ and take shuttle (_ out.
Clean the shuttle race @ with a lint brush.
Put a drop of oil on the center pin of the shuttle (_ and
shuttle race@. Do not over oil.
S
tLJ
J
• Replacing shuttle assembly
Levers
(_ Shuttle race cover
(_ Shuttle
(_ Shuttle race
Center pin on the shuttle
(_ Shuttle driver
Pointed hook
(Oil here)
Turn handwheel so that shuttle driver (_ is forming half
moon on the left side of the machine.
Hold shuttle(_ by center pin _) and position shuttle so as
to form a half moon on the right side. The pointed hook
will be on the bottom.
Place shuttle race cover (_ into place over shuttle
assembly.
Snap the levers (_ back into the original position.
@
\\
I
J
7O
Loading ...
Loading ...
Loading ...