Loading ...
Loading ...
Loading ...
BUTTONHOLE STITCHES
Buttonhole
(_ Stitch selector:
Stitch length:
_) Needle thread tension:
Presser foot:
Green zone
1 to5
Sliding buttonhole foot
@
@
PATTERN: BH
(__--q )
LENGTH: ......
Depending on your preference, you may adjust stitch density
within the green zone on the stitch length control.
* For more density, turn the stitch length control toward" 0 ".
Fine stitches for lightweight fabrics.
* For less density, turn the stitch length control toward" 1 ".
_) Coarse stitches for heavyweight fabrics.
NOTE: Always check a buttonhole on a scrap of fabric to
make sure the adjustment satisfies you.
• Starting to sew
Carefully mark buttonhole length on fabric.
Place the fabric under the foot with the buttonhole marking
running toward you.
S
J
Move the slider (A) toward you so that the top mark (C) on the
slider meets the start mark (B). Line up the markings on the
foot with the top mark on the fabric. Lower the presser foot.
NOTE: The markings on the slider are engraved in
centimeters.
Set the stitch selector at _ .Sew forward until you reach the
front marking of your buttonhole. Stop sewing at a left stitch.
c_
J
A_
58
Loading ...
Loading ...
Loading ...