Loading ...
Loading ...
Loading ...
GETTING READY TO SEW
Connecting Machine to Power Supply
(_ Power supply plug (_ Power switch
(_ Outlet _) Machine socket
_) Machine plug _) Light bulb
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power.
1.Turn off the power switch _.
2. Insert the machine plug @ into the machine socket _).
3. Insert the power supply plug (_ into the outlet _.
4. Turn the power switch _)to turn on the power and sewing
light _).
ForYour Safety
* While in operation, always keep your eyes on the sewing
area. Do not touch any moving parts such as the thread
take-up lever, handwheet or needle.
* Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended.
- When attaching or removing any parts.
- When cleaning the machine.
* Do not place anything on the foot control, when not sewing.
When Finished Sewing
* When you are finished sewing, turn all controls to off (" O ")
position, then remove plug from outlet.
* Unplug foot control from machine.
* Lower presser foot lifter.
* Remove needle thread (Top thread). Turn handwheet to
lower needle bar to the lowest position.
* Place your machine out of reach of children in safe, dry
location.
Operating Instructions:
"For appliances with a polarized plug (one blade wider than
the other). To reduce the risk of electric shock,this plug is
intended to fit in a polarized outlet only one way.
If it does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the
power outlet. Do not modify the plug in any way."
"Foot Controller Model YC-482J or TJC-150 is used with
Sewing Machine Models 384.13012XXX."
XXX - represents numbers 000 through 999.
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster the
machine runs.
J®
s
14
Loading ...
Loading ...
Loading ...