Loading ...
Loading ...
Loading ...
English - 17
English - 14
Do not overtighten the compression nut.
• Using Copper Tubing
- Slip the compression nut and ferrule on copper
tubing as shown.
• Using Plastic Tubing
- Insert the molded end(Bulb) of the plastic
tubing into the compression fi tting.
Do not use without the molded end(Bulb)
of the plastic tubing.
3. Tighten the compression nut onto the
compression fi tting.
4. Turn water on and check for any leakage.
• Water line must be connected to
drinkable water only.
• When pushing the Refrigerator back,
make sure you don’t roll over the power
cord or water line (Icemaker supply line).
ICE MAKER OPERATION
The ice maker will produce 8 cubes per cycle
- approximately 100~130 cubes in a 24-hour
period, depending on freezer compartment
temperature, room temperature, number of door
openings and other use conditions.
Throw away the fi rst few batches of ice to allow
the water line to clear.
Be sure nothing interferes with the sweep of the
feeler arm.
When the bin fi lls to the level of the feeler arm, the
icemaker will stop producing ice.
After the icemaker has been turned on again,
there will be a time delay before the icemaker
resumes operation.
It is normal for several cubes to be joined together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink.
So if you don’t want to make ice, press the Ice Off
button.
Test Button
CAUTION
DA68-02601C-00.indb 14 2014. 8. 18. �� 8:46
English - 15
OPERATING
Operating your French Door
Refrigerator
( 1 )
Ice Off
Button
Press the Ice off button if you want to
turn the ice-maker off.
( 2 )
Power
Freeze
Button
Speeds up the time needed to freeze
products in the Freezer. It can be helpful
if you need to quickly freeze easily
spoiled items or if the temperature in the
Freezer has warmed dramatically (for
example, if the door was left open).
( 3 )
Freezer
Button
Press the Freezer button to set the
Freezer to your desired temperature. You
( 4 )
Fridge
Button
Press the Fridge button to set the fridge
to your desired temperature.
You can set temperature between
( 5 )
Power
Cool
Button
Speeds up the time needed to cool
products in the Refrigerator. It can be
helpful if you need to quickly cool easily
spoiled items or if the temperature in
the fridge has warmed dramatically (For
example, if the door was left open).
( 6 )
Energy
Saver
Button
For better energy effi ciency, press
Energy Saver button. However, if
condensation occurs on the door, turn
the Energy Saver function off.
Press this button for 3 seconds to
switch the temperature units between
°C and °F.
( 7 )
Filter
Indicator
When the fi lter indicator light is on, it is
time to change the fi lter. Typically this
happens about every 6 months.
The fi lter Indicator will be Off when
you press the Fridge and Power Cool
buttons at the same time for 3 seconds.
The fi lter Indicator will be Red when you
have used your water fi lter for 6 months
or used more than 300 Gallon of water.
COOLING OFF MODE
(“OF & OF” CODE ON THE
DISPLAY)
This function is for store display
refrigerators. It is not for customer use.
In Cooling Off Mode, the refrigerator works
but doesn’t make cool air. To cancel this
mode, press the Power Freeze and Freezer
buttons at the same time for 5 seconds
until a “Ding-dong” sound is heard and the
unit will now cool.
CAUTION
G
1 2 3 4 5 67
USING THE CONTROL PANEL
DA68-02601C-00.indb 15
The icon will blink red for several
seconds when you open or close the
door.
DA68-02601C-06-(EN+ES+FR).indd 17 2018-09-04 10:46:28
English - 16
English - 14
Do not overtighten the compression nut.
• Using Copper Tubing
- Slip the compression nut and ferrule on copper
tubing as shown.
• Using Plastic Tubing
- Insert the molded end(Bulb) of the plastic
tubing into the compression fi tting.
Do not use without the molded end(Bulb)
of the plastic tubing.
3. Tighten the compression nut onto the
compression fi tting.
4. Turn water on and check for any leakage.
• Water line must be connected to
drinkable water only.
• When pushing the Refrigerator back,
make sure you don’t roll over the power
cord or water line (Icemaker supply line).
ICE MAKER OPERATION
The ice maker will produce 8 cubes per cycle
- approximately 100~130 cubes in a 24-hour
period, depending on freezer compartment
temperature, room temperature, number of door
openings and other use conditions.
Throw away the fi rst few batches of ice to allow
the water line to clear.
Be sure nothing interferes with the sweep of the
feeler arm.
When the bin fi lls to the level of the feeler arm, the
icemaker will stop producing ice.
After the icemaker has been turned on again,
there will be a time delay before the icemaker
resumes operation.
It is normal for several cubes to be joined together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink.
So if you don’t want to make ice, press the Ice Off
button.
Test Button
CAUTION
DA68-02601C-00.indb 14 2014. 8. 18. �� 8:46
English - 15
OPERATING
Operating your French Door
Refrigerator
( 1 )
Ice Off
Button
Press the Ice off button if you want to
turn the ice-maker off.
( 2 )
Power
Freeze
Button
Speeds up the time needed to freeze
products in the Freezer. It can be helpful
if you need to quickly freeze easily
spoiled items or if the temperature in the
Freezer has warmed dramatically (for
example, if the door was left open).
( 3 )
Freezer
Button
Press the Freezer button to set the
Freezer to your desired temperature. You
( 4 )
Fridge
Button
Press the Fridge button to set the fridge
to your desired temperature.
You can set temperature between
( 5 )
Power
Cool
Button
Speeds up the time needed to cool
products in the Refrigerator. It can be
helpful if you need to quickly cool easily
spoiled items or if the temperature in
the fridge has warmed dramatically (For
example, if the door was left open).
( 6 )
Energy
Saver
Button
For better energy effi ciency, press
Energy Saver button. However, if
condensation occurs on the door, turn
the Energy Saver function off.
Press this button for 3 seconds to
switch the temperature units between
°C and °F.
( 7 )
Filter
Indicator
When the fi lter indicator light is on, it is
time to change the fi lter. Typically this
happens about every 6 months.
The fi lter Indicator will be Off when
you press the Fridge and Power Cool
buttons at the same time for 3 seconds.
The fi lter Indicator will be Red when you
have used your water fi lter for 6 months
or used more than 300 Gallon of water.
COOLING OFF MODE
(“OF & OF” CODE ON THE
DISPLAY)
This function is for store display
refrigerators. It is not for customer use.
In Cooling Off Mode, the refrigerator works
but doesn’t make cool air. To cancel this
mode, press the Power Freeze and Freezer
buttons at the same time for 5 seconds
until a “Ding-dong” sound is heard and the
unit will now cool.
CAUTION
G
1 2 3 4 5 67
USING THE CONTROL PANEL
DA68-02601C-00.indb 15
The icon will blink red for several
seconds when you open or close the
door.
DA68-02601C-06-(EN+ES+FR).indd 16 2018-09-04 10:46:27
English - 16
DA68-02601C-06-(EN+ES+FR).indd 16 2018-09-05 10:49:00
Loading ...
Loading ...
Loading ...