RF26HFENDSR/AA-03 User Manual

Loading ...

English - 13

English - 11

SETTING UP

DISASSEMBLE THE FLEX

DOOR

1. Take out the upper drawer by lifting it up.

2. Take out the lower basket ( 1 ) by lifting the

basket up from the rail system.

3. Press the ﬁ xing hook of rail system.

4. After holding and pulling out the top of Freezer

Door, remove it at the rail system.

Be careful not to scratch or dent the

Sliding rail by letting it strike the ﬂ oor.

Make sure that you mount the freezer

basket in the right position when removing

/ installing the freezer door. Failing to do

so may result in the door not opening or

closing properly.

Do not overload the bottom basket or

the top drawer. Overloading prevents the

Freezer drawer from closing properly and

will eventually cause frost build-up.

CAUTION

DA68-02601C-00.indb 11 2014. 8. 18. �� 8:45

English - 10

Disassemble the refrigerator doors

Be careful not to drop and scratch the

doors while removing them.

With the door opened

1. Remove 3 screws holding down the TOP

TABLE ( 1 ) and turn it with wires connected.

2. Disconnect two connector ( 2 ) on the left side

door. To remove the water coupler from the

hinge, twist and pull it from the hinge.

3. Remove the bolt (3) attached to the upper

hinge with Socket wrench (10mm). Remove

the ground screw ( 4 ) attached to the upper

left door hinges with a philips screwdriver (+).

Remove the upper left and right door hinges

( 5 ).

WARNING

4. Lift the door straight up to remove.

5. Remove the screw ( 6 ) attached to the

lower left and right door hinges with a philips

screwdriver (+). Remove the 2 hex head bolts

( 7 ) attached to the lower left and right door

hinges with an allen wrench (3/16”). Remove

the lower left and right door hinges ( 8 ).

Allen wrench

DA68-02601C-00.indb 10 2014. 8. 18. �� 8:45

DA68-02601C-06-(EN+ES+FR).indd 13 2018-09-04  10:46:25

English - 12