Loading ...
Loading ...
Loading ...
17
Operating Instructions
1.
Switch on the circuit breaker,
the heater will begin in Standby
mode. At this time the lowest heat
temperature setting LED will be
ashing to indicate the unit is in
Standby.
2.
Point the remote control directly
to the receiver, press ‘LOW’,
‘MED’, ‘HIGH’ to set your desired
temperature setting.
Green LED indicators
(timer)
Remote
control
Red LED indicators
(temperature setting)
Remote
control
Low power level
Medium power level
High power level
!
NOTE:
To prevent unpleasant burnt odor, it is recommended to keep the
heater clean preventing accumulation of dust build up
!
NOTE:
The distance between the heater and the remote control should
be less than 3 M (9.8 ft.), and the remote control must be pointed directly to
the receiver on the front panel during the operation.
CAUTION:
There is a built in
safety feature that will automatically
trigger the heater to go into standby
mode after eight hours of continuous
operation. At this time the lowest
heat temperature setting LED will be
ashing to indicate the safety feature
has executed.
3.
To set the heater to standby
mode point the remote control
directly at the receiver and press
‘STANDBY’. At this time the
lowest heat temperature setting
LED will be ashing to indicate the
unit is in STANDBY mode.
Loading ...
Loading ...
Loading ...