Loading ...
Loading ...
Loading ...
13
Installation
6. Set the adjustable angle mounting brackets to the desired angle and
fasten brackets with an adjustable wrench.
For ceiling-mounted installation, the available mounting angles are
For wall-mounted installation, the available mounting angles are restricted
7. Hang the heater on the brackets
and rmly tighten bolts on the
bracket to compress the two
plates together as shown in
Figure A.
!
NOTE:
Depending on material
and design of ceiling structural
elements, the heater must be
secured with the correct fasteners.
The weight of the heater is up to
5.3 KG (11.7 lbs.), the installation
location must be able to hold
5 times the weight
of the heater.
WALL CEILING
restricted to 0°, and 30° only.
to 30° and 45° only.
For the DIR 2200W, ceiling mounted installation is prohibited.
Loading ...
Loading ...
Loading ...