Loading ...
Loading ...
Loading ...
25
• Never overload the grill with food – evenly space
over the cooking grill surface, ensuring sucient
air circulation to the burners.
• DO NOT store or cover the grill until fully
cooled.
• Keep outdoor cooking appliance area clear and
free from combustible materials, gasoline and
other ammable vapors and liquids.
• Do not empty the grease tray until the grill
has cooled down.
• This product is not suitable for Lava Rock.
• Retain instructions for future reference.
• Installation must conform with local codes or, in
the absence of local codes with either the
National Fuel Gas Code, ANSI Z223.1/NFPA 54,
Natural Gas and Propane Installation Code. CSA
B149.1, or Propane Storage and Handling Code,
B149.2
ALTHOUGH EVERY PRECAUTION HAS BEEN
TAKEN TO ELIMINATE SHARP EDGES, ALWAYS
TAKE CARE WHEN HANDLING METAL
COMPONENTS.
Do Not Bring Goods Back To Place Of Purchase.
USER INSTRUCTIONS
Connecting to the Cylinder
• Conrm all grill control knobs are in the o
position and ensure gas is turned o.
• Connect the regulator to the gas cylinder
according to your regulator and cylinder dealer’s
instructions.
Use Instructions - Grill
Before proceeding, make certain that you
understand the WARNINGS section of this manual.
• Preparation before cooking – To prevent foods
from sticking to the cooking grill, apply a light
coat of cooking or vegetable oil to food before
barbecuing session.
• Note: When cooking for the rst time, paint
colors may change slightly as a result of high
temperatures. This is normal and should be
expected.
• Inspect the hose before each use of the outdoor
cooking gas appliance.
• If it is evident there is excessive abrasion or
wear, or the hose is cut, it must be replaced prior
to the outdoor cooking gas appliance being put
into operation. The replacement hose assembly
must be identical to the original part. See Part
List.
Lighting the Grill
• Turn on gas supply at gas cylinder.
• Push control dial in and slowly turn to
position.
• If burner does not light, return to
position
and try again.
• Once ignition has occurred, hold dial in for at
least 10 seconds to ensure the burner stays lit.
• If burner does not light or stay lit after holding
dial in for 10 seconds, turn the dial to
position and wait for 1 minute and try again. Do
not continuously hold the dial in as you may
cause a build up of gas.
• In windy conditions shield from wind to ensure
easy lighting.
• Turn control dial to alter burner settings as
required.
To Turn O:
• Push the dial in and turn to the
position.
• Turn the gas o and disconnect at the cylinder
when not in use.
Use Instructions - Side Cart
The customer has the option to secure the side cart
to the grill or to keep it detached. To attach the side
cart to the grill, lift the side cart slighly on the left
and lower down to lock in to the grill side brackets.
Note: make sure the side cart wheels are on the
left hand side. If you wish to keep the side cart
detached, you can remove the side brackets from
the grill.
Loading ...
Loading ...
Loading ...