Loading ...
Loading ...
Loading ...
Assembly Step 17
Leak Testing
Your grill has been checked at all factory
connections for leakage. To be performed in a well
ventilated area. Conrm all control knobs are in
the o position. To check the connection at the gas
hose/regulator/cylinder:
1. Make leak test solution by mixing 50%
water with 50% liquid dish soap.
2. Brush several drops of the solution
onto the gas hose/regulator/cylinder
and hose connection.
3. Turn on the gas cylinder valve.
Inspect the connections and look for bubbles.
NEVER USE AN OPEN FLAME to test for leaks
at any time.
4. If no bubbles appear the connection is safe.
5. If bubbles appear, there is leakage.
Turn o gas supply and re-tighten all joints.
Repeat test. If bubbles form again, do not use the
grill. Please contact the helpline stated in this
manual.
Leak test annually and whenever the gas bottle is
removed or replaced.
NOTE: Leak Test to be performed before using the appliance.
Hose / Regulator Regulator / Cylinder
Points for leak testing
23
Loading ...
Loading ...
Loading ...