Loading ...
Loading ...
Loading ...
ToreplacetheOilFilter:
1. Draintheoilasinstructionpreviouslyinthis section.
2. Removetheoil filter. Disposeof the oldoil filter properly.
3. Lube gasketof newoil filterwithcleanoil.
4. Installandturnoil filterbyhanduntilthegasketcomesincontactwith
the sealingsurfaceof thecrankcasecover,thentightenthe oil
filter,10-12Nm(88.5-106.2in-lb),1/2-3/4turn.
5. Add oil as previouslyinstructed.
6. Makesuredipstickisinstalled.
7. Start and run engine. Checkfor leaks.
8. Stopengine. Waita few minutesand checkthe oil level. See
CheckingTheOil Levelin the Assemblysectionof this manual.
Adding Oil
iMPORTANT: Besureto checkengineon alevelsurfacewiththe
enginestopped.
1. Wipe around dipstick cap and tube with a clean cloth to
remove any debris. SeeFig. 22.
Donot use _ressurizedair or solventstoclean theair cleaner
cartridge.
Iffilters,or coversare notinstalledcorrectlyseriousinjuryordeath
could resultfrom backfire.Do not attemptto startthe enginewith
themremoved.
IMPORTANT: Neverrunthe enginewithoutthe air filter.Rapid
enginewearwill result.
1. Unscrewthethumb screwsand removethe air filter cover.See
Fig.23.
Thumb
Screw
Air Filter
, '///
/
Figure 22
2. Remove dipstick and wipe clean with a cloth.
3. Pour oil into the dipstick tube. Do not over fill. With an oil
filter change the high level amount of oil for this engine is
1700 ml (57.48 fl-oz.).
4. Install dipstick and turn to locked position before starting
engine.
5. Start engine. Allow to run for a few seconds and then shut
down the engine.
6. Check the oil level. See Checking Oil Level in the Assembly
section of this manual.
Air Filter Service
Paperfilterscannotbecleanedand shouldbe replacedevery100
operatinghours;moreoftenif usedin extremelydusty conditions.
Figure23
Removethe air filter.SeeFig. 24.
/
{ '_, ..................................../
/
/ i
Neverusegasolineor lowflash point solventsfor cleaningthe airfilter
element.Afire or explosioncould result.
23
Figure24
Loading ...
Loading ...
Loading ...