Loading ...
Loading ...
Loading ...
Contentsof Crate
• One RidingMower
OneSteeringWheel/ShaftAssembly
OneRearHitchPlate
OneRidingMowerOperator'sManual
OneSeatAssembly
OneRearEngineCover
OneOil DrainSleeve
OneEngineOperator'sManual
OneSteeringPedestalCap
OneDischargeChuteAssembly
• One HardwarePack
• One ProductRegistrationCard
CONTENTS OF HARDWARE PACK
Beforebeginninginstallation,removeall the contentsfrom the crate
andall the hardwarefromthe pack from to makesureeverything
is present.Hardwareis listedbelow.Partnumbersare shownin
parentheses.
• Two5/16-18x 3/4" Screws-- HitchPlate(710-3008)
• Two5/16-18LockNuts-- HitchPlate(712-04063)
• Two1/4-15x 1"Screws-- EngineRearCover(710-1241)
• TwoShoulderBolts-- SeatPivotBracket(738-0140)
• Two5/16-18LockNuts-- SeatPivotBracket(712-04063)
• One 1/4-20x 3/4" Screw-- SteeringPedestal(710-0924)
• One 3/16HexKey-- SteeringShaft(710-05046)
RECOMMENDED TOOLS FOR ASSEMBLY
• 3/16" HexKey(includedin hardwarepack)
• 1/4" DriveRatchet
• 3/16"Wrench(or adjustablewrench)
• 3/8" Wrench(or adjustablewrench)
• 1/2" Wrench(or adjustablewrench)
• 5/8" Wrench(or adjustablewrench)
• 3/8" Socketwrench
• 1/2" Socketwrench
INSTALLING THE STEERING WHEEL ASSEMBLY
If the steeringwheelassemblyfor yourtractordidnot comealready
installed,followthe stepsbelow:
1. Slide the pedestalcap ontothe steeringshaftso thatwhenthe
steeringshaftis installedonthe tractor,the pedestalcap willbe
uprightas shownin 1.Slidethe pedestalcap ontothe steering
shaft so thatwhen the steeringshaft is installedon the tractor,the
pedestalcap will beuprightas shownin Figure1..
2. Removethe socketheadscrewandlocknut from the steering
shaft on the tractorand retainfor latersteps.
3. With the steeringwheelassemblyuprightand positionedoverthe
lowersteeringshafton the tractor,alignthe steeringwheelso that
withthe tractorwheelsstraight,the largeopeningonthe steering
wheelis facingforward.
4. Lowerthe steeringwheelassemblyontothe lowersteeringshaft
and securewiththe socketheadscrewand lock nut previously
removed.SeeFigure2.
.
6.
Figure 2
NOTE: Besureto alignthe sockethead screwsothatthe head
of the screwfits intothe largerhole providedon the uppersteer-
ing shaftoncetightened.Oncesocketheadscrewis in place,feel
free to turnthe steeringshaftfor easieraccess to the hardware.
Tightenthe sockethead screwand lock nutusingprovidedhex
keyanda 7/16"wrenchor ratchet.
Slidethe Pedestalcap downontothe tractor(1)andclip into
place.Securethe pedestalwiththe hex screw(2) from the
hardwarepack.See6. Slidethe Pedestalcapdownonto the
tractor(1) andclip intoplace.Securethe pedestalwiththe hex
screw(2) from the hardwarepack.SeeFigure3..
Figure 1
Loading ...
Loading ...
Loading ...