Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY 281
(Continued)
6. Slide the retainer up the steel extension tube and
winch cable. Rotate the retainer and push it through
the hole in the wheel.
Releasing Winch Retainer
JACKING INSTRUCTIONS
Jack Warning Label
1. Loosen (but do not remove) the wheel lug nuts,
using the lug wrench by turning them counter-
clockwise, one turn, while the wheel is still on the
ground.
Loosen Lug Nuts
2. Assemble the jack and tools Ú page 280.
Jack And Tool Assembled
WARNING!
Carefully follow these tire changing warnings to help
prevent personal injury or damage to your vehicle:
Always park on a firm, level surface as far from the
edge of the roadway as possible before raising the
vehicle.
Turn on the Hazard Warning Flashers.
Apply the parking brake firmly and set the transmis-
sion in PARK.
Block the wheel diagonally opposite the wheel to be
raised.
Never start or run the engine with the vehicle on a
jack.
Do not let anyone sit in the vehicle when it is on a
jack.
Do not get under the vehicle when it is on a jack. If
you need to get under a raised vehicle, take it to a
service center where it can be raised on a lift.
Only use the jack in the positions indicated and for
lifting this vehicle during a tire change.
If working on or near a roadway, be extremely careful
of motor traffic.
To assure that spare tires, flat or inflated, are
securely stowed, spares must be stowed with the
back of the wheel facing the ground.
WARNING!
7
23_WS_OM_EN_USC_t.book Page 281
Loading ...
Loading ...
Loading ...