Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 145
(Continued)
INDICATIONS ON THE DISPLAY
The Active Driving Assist system status can always be
viewed in the instrument cluster display, and status
changes are shown by changes in color of the system’s
indicator lights.
As the system detects driver inattentiveness as previously
described
Ú page 143, the system status indicator lights
will change from green, to yellow, to red, while the steering
wheel icon on the display moves up the screen to the
center. The following indicators will change in color as
warnings to the driver escalate:
Active Driving Assist Indicator (steering wheel icon in
the instrument cluster display)
Glow effect of the instrument cluster display
If driver’s hands are not returned to the steering wheel,
the system will deactivate.
Active Driving Assist Indicators Are Off
ADA is not turned on/enabled by the driver.
Active Driving Assist Indicators Are White
ADA is turned on/enabled by the driver, but the system
is not actively providing steering and providing speed
control for to the vehicle.
Active Driving Assist Indicators Are Green
The system detects driver is attentive and is actively
steering and providing speed control for the vehicle.
Active Driving Assist Indicators Are Yellow
Driver inattentiveness has been detected, warning the
driver to place hands on the steering wheel.
Active Driving Assist Indicators Are Red
Driver inattentiveness is still being detected, or driver
take-over is being requested, warning the driver to
place hands on the steering wheel. This warning is also
issued when the system has detected a tight curve and
is warning the driver to take control
NOTE:
The driver
MUST place hands on the steering wheel and
take control of the vehicle when the system is deactivated.
Active Driving Assist Cancelled Message
SYSTEM STATUS
Along with changes in the system’s indicator lights (green,
yellow, and red), the system can also issue a steering
wheel vibration to accompany these warnings. The
vibration warning (if enabled) will occur if the vehicle
crosses a lane marker, for example, when driving on a
tight curve. This feature can be turned on or off within the
Uconnect system
Ú page 187.
SYSTEM OPERATION/LIMITATIONS
WARNING!
Active Driving Assist is an SAE Level 2 Driver Assist
feature, requiring driver attention at all times. To
prevent serious injury or death:
Always remember that the Active Driving Assist
system is a convenience system that cannot accu-
rately detect all situations. Complete attention is
always required while driving, even when using the
Active Driving Assist system.
Always remain alert and be ready to take control of
the vehicle in the event that the Active Driving Assist
system deactivates, or otherwise lacks full function-
ality as described further before and after this state-
ment.
4
23_WS_OM_EN_USC_t.book Page 145
Loading ...
Loading ...
Loading ...