Loading ...
Loading ...
Loading ...
144 STARTING AND OPERATING
4. If desired, adjust the ACC distance setting by pushing
the Distance Increase or Distance Decrease buttons.
When all system conditions are met as described in
“System Engagement Conditions” in the next section, the
system will engage and the steering wheel image in the
display will change to green.
Active Driving Assist Engaged (Steering Wheel Green)
NOTE:
Along with the color change of the steering wheel image,
the “glow” effect of the instrument cluster display will also
change to green when ADA is engaged.
System Engagement Conditions
The following conditions must be met before the system
will engage:
Active Driving Assist system is enabled
Driver seat belt is buckled
Driver is not pressing the brake pedal
Driver door is open
Vehicle is at allowable ride height
System detects visible lane markings
Vehicle is traveling below 90 mph (145 km/h)
Vehicle is centered in lane
Turn signal is not activated
Vehicle is not in a tight curve
Trailer is not connected
Driver has hands on steering wheel
NOTE:
For the system to detect the driver’s hands on the steering
wheel, the wheel must be gripped on the outside. Gripping
the inside areas of the steering wheel will not satisfy the
hands-on condition to engage the system.
Do Not Grip Inside Of Steering Wheel
System Deactivation
The system will be deactivated in any of the following
situations:
If the system has detected driver inattentiveness, and
has gone through all escalation warnings
If lane markings are no longer detected
If the brake pedal is pressed or ACC system is deacti-
vated
If a turn signal is used (unless a target is in the blind
spot zone on the same side the turn signal is being
applied)
If the driver applies enough input to the steering wheel
If the driver’s seat belt is released
If the vehicle speed exceeds 90 mph (145 km/h)
If the Active Driving Assist on/off button is pushed
again (ADA will turn off)
If the Forward Collision Warning (FCW) system
becomes active and is providing warnings/braking
NOTE:
ADA will not enable if the system detects a trailer is
connected to the vehicle.
Pushing the Active Driving Assist on/off button will turn
the system off. All other deactivation conditions will
place the system back into the “enabled” state with the
steering wheel indicator displayed in white until all
engagement conditions are met again.
When the system is deactivated, the system status
indicator lights will turn off, Active Lane Management
will return to its previous state, and ACC will disable.
23_WS_OM_EN_USC_t.book Page 144
Loading ...
Loading ...
Loading ...