Loading ...
Loading ...
Loading ...
168 STARTING AND OPERATING
Modes Of Operation
Manual activation of the Surround View Camera is
selected by pressing the Surround View Camera button
located in the Controls menu within the Uconnect system.
Top View
The Top View will show in the Uconnect system with Rear
View or Front View in a split screen display. There is
integrated ParkSense arcs in the image at the front, rear,
and if equipped, the sides of the vehicle. The arcs will
change color from yellow to red corresponding to the
distance zones to the oncoming object.
Surround View Camera View
NOTE:
Front tires will be in image when the tires are turned.
Due to wide angle cameras in the mirrors, the image
may appear distorted.
Top View will show which doors are open.
Open front doors and/or liftgate will cancel outside
image.
Top View Plus Rear View
This is the default view of the system in
REVERSE and is always paired with the Top View
of the vehicle with optional active guidelines for
the projected path when enabled.
Rear Cross Path View
The Rear Cross Path button will give the driver
a wider angle view of the rear camera system.
The Top View will be disabled when this is
selected.
Top View Plus Front View
The Front View will show you what is
immediately in front of the vehicle and is
always paired with the Top View of the vehicle.
Front Cross Path View
The Front Cross Path button will give the driver
a wider angle view of the front camera system.
The Top View will be disabled when this is
selected.
Back Up Camera View
The Back Up Camera button will provide a full
screen rear view with Zoom View.
NOTE:
If the Rear View Camera view was selected through the
Surround View Camera menu, exiting out of the Rear View
screen will return to the Surround View Camera menu. If
the Back Up Camera was manually activated through the
Controls menu of the Uconnect system, exiting out of the
display screen will return to the Controls menu.
Deactivation
The system can be deactivated under the following
conditions:
The speed of the vehicle is greater than 8 mph (13 km/h).
The vehicle is shifted into PARK.
The vehicle is in any gear other than REVERSE and the
touchscreen X button is pressed.
The camera delay system is turned off manually
through Uconnect Settings
Ú page 187.
Camera Washers
When the rear window washer is activated, the rear Back
Up and digital rearview mirror (if equipped) cameras are
also washed
Ú page 62.
When the front window washer is activated, the front
cameras will also be washed
Ú page 61.
NOTE:
If snow, ice, mud, or any foreign substance builds up on
the camera lenses, clean the lenses, rinse with water,
and dry with a soft cloth. Do not cover the lenses.
If a malfunction with the system has occurred, see an
authorized dealer.
WARNING!
Drivers must be careful when backing up even when using
the Surround View Camera. Always check carefully behind
your vehicle, and be sure to check for pedestrians, animals,
other vehicles, obstructions, or blind spots before backing
up. You are responsible for the safety of your surroundings
and must continue to pay attention while backing up. Fail-
ure to do so can result in serious injury or death.
23_WS_OM_EN_USC_t.book Page 168
Loading ...
Loading ...
Loading ...