Loading ...
Loading ...
Loading ...
92
91
100
105
10
7
7
7
2
83
ASSEMBLY INSTRUCTIONS
11
Shoulder
Shoulder
STEP 7
NOTE: The RIGHT PEDAL(112) has an R stamped on the end of the pedal shaft. The RIGHT PEDAL
(112) has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(91) has
an L stamped on the end of the pedal shaft. The LEFT PEDAL(91) has left hand threads and is
tightened by turning counterclockwise.
Thread the RIGHT PEDAL(112) into the RIGHT CRANK(109) as shown. Tighten the pedal securely. The
shoulder of the PEDALS(91, 112) should be in contact with the CRANKS(14, 109) when securely tightened.
Select the RIGHT PEDAL STRAP(113) which has R marked on it. Snap the three hole end to the inside
edge of the RIGHT PEDAL(112). Insert the other end of the strap through the slot and snap the strap to
the hook on the outside edge of the RIGHT PEDAL(112). Select adjustment holes which allow your foot to
be easily removed from the pedals. Use the same procedure to attach the LEFT PEDAL(91) to the LEFT
CRANK(14) and to attach the LEFT PEDAL STRAP(92) to the LEFT PEDAL(91).
STEP 8
Slide the UPRIGHT COVER(83) on the UPRIGHT(2) as shown in the illustration below. Connect the
EXTENSION CONTROL CABLE(75) to the CONTROL CABLE(105). Connect the PULSE SENSOR
CONNECTION WIRE(101) to the PULSE SENSOR EXTENSION WIRE(100). Insert the UPRIGHT(2) onto
the MAIN FRAME(10) and secure with BUTTON HEAD BOLTS w/ WASHERS(M8x1.25x16mm)(7). Slide
the UPRIGHT COVER(83) down to cover the bolts.
Loading ...
Loading ...
Loading ...