Loading ...
Loading ...
Loading ...
Model T809H
Engine Pulley
PTO Idler Bracket
(mounted on tractor)
_Deck Belt (Bottom)
_PTO Belt (Top)
Right Hand Pulley
guard)
Left Hand
Double Pulley
Center Pulley
Figure 16
To change or replace the deck belts on your tractor,
proceed as fallows:
Lower the deck by moving the deck lift lever into the
bottom notch on the right fender.
Remove the belt guards by removing the self-
tapping screws that fasten them to the deck.
Model T809H only: Grasp the PTO idler bracket
and pivot it toward the discharge chute to relieve
tension on the PTO belt.
Model T809H only: Remove the PTO belt from the
engine pulley and from around the PTO idler
pulleys.
Model Z809K
Electric
PTO Clutch
Model Z809K only: Remove the PTO belt from the
electric PTO clutch and from around the PTO idler
pulley, if present.
Grasp the deck idler pulley and pivotit toward the
left side of the deck to relieve tension on the belt.
Remove the belt from around all spindle pulleys,
and deck idler pulley(s).
According to your tractor model, route the new belts
as shown in Figure 16 or Figure 17.
Remount the belt guards removed eadier.
Deck Idler Pulleys
m Deck / PTO belt
Right Hand
Pulley
Left Hand
Pulley
NOTE: Belt covers not shown for clarity. 54-inch deck shown.
Figure 17
2O
Loading ...
Loading ...
Loading ...