Loading ...
Loading ...
Loading ...
(449,1)
北米Model "A9020BE-B" EDITED: 2022/ 5/ 16
one used previously, purge the old fluid
from the piping between the windshield
washer tank and washer nozzles by
operating the washer for a certain period
of time. Otherwise, if the concentration of
the fluid remaining in the piping is too low
for the outside temperature, it may freeze
and block the nozzles.
CAUTION
. Adjust the washer fluid concen-
tration appropriately for the out-
side temperature. If the concen-
tration is inappropriate, sprayed
washer fluid may freeze on the
windshield and obstruct your
view, and the fluid may freeze in
the windshield washer tank.
. Be careful foreign matter does
not contaminate the washer fluid
when filling the tank. Contamina-
tion could cause malfunctions,
such as clogging the pump.
. State or local regulations on
volatile organic compounds may
restrict the use of methanol, a
common windshield washer anti-
freeze additive. Washer fluids
containing non-methanol anti-
freeze agents should be used
only if they provide cold weather
protection without damaging
your vehicle’s paint, wiper blades
or washer system.
11-25. Replacement of Wiper
Blades
s11az
Grease, wax, insects, or other material on
the windshield or the wiper blade results in
jerky wiper operation and streaking on the
glass. If you cannot remove the streaks
after operating the windshield washer or if
the wiper operation is jerky, clean the outer
surface of the windshield using a sponge
or soft cloth with a neutral detergent or
mild-abrasive cleaner. Do not, however,
use detergent to clean the blade rubbers.
Use only a sponge or soft cloth (and no
neutral detergent or mild abrasive cleaner)
when you clean the blade rubbers. After
cleaning the window glass and wiper blade
rubbers, be sure to rinse them with clean
water. Rinse the window until the water
does not form beads on the glass. This
indicates that the glass is clean.
CAUTION
. Do not clean the wiper blades
with gasoline or a solvent, such
as paint thinner or benzine. This
will cause deterioration of the
wiper blades.
. When you wish to raise the pas-
senger-side wiper arm, first raise
the driver-side wiper arm. Other-
– CONTINUED –
Replacement of Wiper Blades
447
11
Maintenance and Service
Loading ...
Loading ...
Loading ...