Loading ...
Loading ...
Loading ...
(225,1)
北米Model "A9020BE-B" EDITED: 2022/ 5/ 16
NOTE
Even when the operation conditions of
the high beam assist function are met,
there may be a case in which the high
beam assist indicator does not illumi-
nate.
! How to temporarily lower the sensi-
tivity of the high beam assist func-
tion (models with the EyeSight sys-
tem)
s03ah0704
The sensitivity of the high beam assist
function can be lowered by using the
following operations.
1. Before turning the ignition switch to the
“ON” position, set the light control switch to
the “AUTO” position and push the signal
lever forward (high beam position).
2. Turn the ignition switch to the “ON”
position and within approximately 15 sec-
onds, press the “
/ ” (following distance
setting) switch more than 10 times con-
secutively.
When the sensitivity of the high beam
assist function is lowered, the high beam
assist indicator light “
” on the combina-
tion meter display (color LCD) will flash.
NOTE
. The sensitivity of the high beam
assist function cannot be lowered in
the following conditions.
– Cruise control or Adaptive Cruise
Control indicator is illuminated.
– The EyeSight warning indicator
(yellow) is illuminated.
. The sensitivity of the high beam
assist function returns to normal level
the next time the ignition switch is
turned to the “LOCK”/“OFF” position
and the engine is restarted.
! How to temporarily lower the sensi-
tivity of the high beam assist func-
tion (models without the EyeSight
system)
s03ah0710
The sensitivity of the high beam assist
function can be lowered by using the
following operations.
1. Turn the ignition switch to the “ON”
position.
1) Switch
2. Press and hold the “ ” switch for 15 to
20 seconds.
When the sensitivity of the high beam
assist function is lowered, the LED indi-
cator on the automatic dimming on/off
button will flash.
NOTE
. The sensitivity of the high beam
assist function cannot be lowered while
driving.
. You can resume the sensitivity of the
high beam assist function by using
either of the following operations.
– Turn the ignition switch to the
“LOCK”/“OFF” position and then
start the engine.
– CONTINUED –
Light Control Switch
223
3
Instruments and Controls
Loading ...
Loading ...
Loading ...