Loading ...
Loading ...
Loading ...
(438,1)
北米Model "A9020BE-B" EDITED: 2022/ 5/ 16
11-19. Hill Start Assist Sys-
tem
s11bf
Ensure that the Hill start assist system
operates properly under the following
circumstances.
1. Stop the vehicle on an uphill grade by
depressing the brake pedal (all models)
and clutch pedal (MT models only), with
the engine running.
2. Make sure that the vehicle does not
move backward for several seconds after
the brake pedal is released.
3. Then make sure the vehicle starts
climbing the grade by following the normal
starting procedures.
If the Hill start assist system does not
operate as described above, contact your
SUBARU dealer.
11-20. Replacement of Brake
Pad and Lining
s11at
CAUTION
. If you continue to drive despite
the scraping noise from the audi-
ble brake pad wear indicator, it
will result in the need for costly
brake rotor repair or replace-
ment.
. It is recommended that you dis-
connect the vehicle battery be-
fore replacing the brake pad.
However, it is dangerous to dis-
connect the vehicle battery. We
recommend that you have your
SUBARU dealer replace the brake
pad.
The disc brakes have audible wear in-
dicators on the brake pads. If the brake
pads wear close to their service limit, the
wear indicator makes a very audible
scraping noise when the brake pedal is
applied.
If you hear this scraping noise each time
you apply the brake pedal, have the brake
pads serviced by your SUBARU dealer as
soon as possible.
& Breaking-In of New Brake
Pads (CVT Models)
s11at02
When replacing the brake pad, use only
genuine SUBARU parts. After replace-
ment, the new parts must be broken in.
Contact your SUBARU dealer for details.
Hill Start Assist System
436
Loading ...
Loading ...
Loading ...