Loading ...
Loading ...
Loading ...
(384,1)
北米Model "A9020BE-B" EDITED: 2022/ 5/ 16
CAUTION
Do not hit and bend the disc rotor
backing plate when removing and
installing the tire. A bent backing
plate may scrape against the disc
rotor and cause noise while the
vehicle is in motion.
NOTE
Contact a SUBARU dealer when jacking
up the vehicle using a garage jack.
1. Park on a hard, level surface, when-
ever possible, then stop the engine.
2. Apply the parking brake securely and
shift the shift lever to reverse (MT models)
or the select lever to the “P” (Park) position
(CVT models).
3. Turn on the hazard warning flasher and
unload all occupants and luggage from the
vehicle.
4. Put wheel blocks at the front and rear
of the tire diagonally opposite the flat tire.
5. Take out the jack, jack handle and
wheel nut wrench.
The tools and the spare tire are stored
under the floor of the trunk. Refer to
“Maintenance Tools” �P379.
NOTE
. Make sure that the jack is well
lubricated before using it.
. To take out the tools and spare tire,
open the under-floor storage. Refer to
“Maintenance Tools” �P379.
6. Take out the under-floor storage com-
partment and turn the attaching bolt
counterclockwise, then take the spare tire
out.
NOTE
Carefully read “Temporary Spare Tire”
�P378 and strictly follow the instruc-
tions.
Flat Tires
382
Loading ...
Loading ...
Loading ...