Loading ...
Loading ...
Loading ...
(308,1)
北米Model "A9020BE-B" EDITED: 2022/ 5/ 16
for maximum fuel economy. At times,
depending on varying driving condi-
tions, a chain operating noise may be
heard that is characteristic of this type
of system.
. Place the shift boot to the original
position after it is lifted. If the select
lever is operated with the shift boot in
the rolled up position, the shift boot
may have tension and it may disturb the
select lever operation.
& Select Lever
s07bg01
1) Select lever button
: With the brake pedal depressed, shift
while pressing the select lever button in
: Shift while pressing the select lever
button in
: Shift without pressing the select lever
button
The select lever has four positions, “P”,
“R”, “N”, “D” and also has an “M” position
for using the manual mode.
NOTE
. For some models, to protect the
engine while the select lever is in the
“P” or “N” position, the engine is
controlled so that the engine speed
may not become too high even if the
accelerator pedal is depressed hard.
. When you change the select lever
position, make sure to move the select
lever firmly to the selected position.
! P (Park)
s07bg0101
This position is for parking the vehicle and
starting the engine. In this position, the
transmission is mechanically locked to
prevent the vehicle from rolling freely.
When you park the vehicle, first apply the
parking brake, then shift into the “P”
position. Do not hold the vehicle with only
the mechanical friction of the transmission.
To shift the select lever from the “P” to any
other position, you should depress the
brake pedal fully then move the select
lever. This prevents the vehicle from
lurching when it is started.
! R (Reverse)
s07bg0102
This position is for backing the vehicle. To
shift from the “N” to “R” position, stop the
vehicle completely then move the lever to
the “R” position while pressing the select
lever button in.
When the ignition switch has been turned
to the “ACC” position, the movement of the
select lever from the “N” to “R” position is
only possible by depressing the brake
pedal. For details, refer to “Shift Lock
Function” �P307.
Continuously Variable Transmission
306
Loading ...
Loading ...
Loading ...