Loading ...
Loading ...
Loading ...
(439,1)
北米Model "A9020BE-B" EDITED: 2022/ 5/ 16
& Breaking-In of New Brake
Pads and Linings (MT Mod-
els)
s11at01
When replacing the brake pad or lining,
use only genuine SUBARU parts. After
replacement, the new parts must be
broken in as follows.
! Brake pad and lining
s11at0101
While maintaining a speed of 30 to 40 mph
(50 to 65 km/h), step on the brake pedal
lightly. Repeat this five or more times.
! Parking brake lining
s11at0102
1. Drive the vehicle at a speed of approxi-
mately 22 mph (35 km/h).
2. With the parking brake release button
pushed in, pull the parking brake lever
SLOWLY and GENTLY (pulling with a
force of approximately 33.7 lbf [150 N,
15.3 kgf]).
3. Drive the vehicle for approximately 220
yards (200 meters) in this condition.
4. Wait 5 to 10 minutes for the parking
brake to cool down. Repeat this proce-
dure.
5. Check the parking brake stroke. If the
parking brake stroke is out of the specified
range, adjust it by turning the adjusting nut
located on the parking brake lever.
Parking brake stroke:
7 – 8 notches / 45 lbf (200 N, 20.4 kgf)
WARNING
A safe location and situation should
be selected for break-in driving.
CAUTION
Pulling the parking brake lever too
forcefully may cause the rear wheels
to lock. To avoid this, be certain to
pull the lever up slowly and gently.
11-21. Parking Brake Stroke
(MT Models)
s11au
Check the parking brake stroke according
to the maintenance schedule in the “War-
ranty and Maintenance Booklet”.
Parking Brake Stroke (MT Models)
437
11
Maintenance and Service
Loading ...
Loading ...
Loading ...