Loading ...
Loading ...
Loading ...
OPERATING INSTRUCTIONS
1.
Ensure the filter plate and drain filter is clean and free ofiood debris. Check the
drain filter isflush with the filter plate and the spray arm is correctly on the
impeller.
2. Check there, is rinse agent in the dispenser.
3.
4.
Remove all food scraps from the dishes.
Load the dishes. Overcrowding the DishDrawer may lead to poor wash
performance. Ensure there,art, no items blocking the spray arm path.
S.
Pour detergent into the detergent dispenser, then close the dispenser door.
Use the steps on the detergent dispenser as a guide to the correct amount of
detergent to use. Where the detergent manutactu rer has made recommendations
on quantities, we suggest you ioI[ow their instruction.
6.
7.
Select the wash program on the secondary centre[ panel. Fouch the Program
button until the desired wash program light shows on the panel. The wash
program has now been selected.
Select Eco Save (Optional)
If you would like the wash program to use less energy and time, Er'oSave should
be selected by touching this button. The wash program light will be green.
8. Close the drawer.
9.
10.
Delay Start (Optional). Ifyou wish to delay the starttime, hold the Start/Pause
button until the Electronic Display background has changed to an orange
color and the "HRS DELAY" symbol comes on. Select the delay time required
and the DishDrawer will start when the time has elapsed.
Start the Wash Program. Pressthe Start/Pause button to start the DishDrawer.
To pause the DishDrawer, press the Start/Pause button and wait ior the two
additional beeps before opening, the "rain" symbol displayed in the
Electronic Display will flash, and the "smiley lace" symbol will disappear.
11.
At the end of the program, the display wil[ show no background light. The
symbols "00" and the "smiley lace" wil[ be displayed on the Electronic Display.
The DishDrawer will beep six times to let you know that it has finished. At the
end of a wash program it is normal to find some water in the drain filter area and
the drying fan will be on ior a period of time or until the drawer is opened.
While the lan continues to be on, it assists with the drying and uses negligible
amounts of energy.
In tile even t era power failure, tile DishDrawer will stop until tile supply power is
resumed. It will drain the water in the DishDrawer and restart in the same part of the
wash program it was in when the power failed.
13
Loading ...
Loading ...
Loading ...