Loading ...
Loading ...
Loading ...
Start / Pause
This button has a number of functions. It serw,s to:
Stari the DishDrawer, once the desired wash program has been selected.
Interrupt the wash program while in operation.
When pausing the DishDrawer, wait until you have heard two additional
beeps before you open the drawer, allowing the lid seal to deflate.
While in the pause mode, the electronic display will be green, the "rain"
symbol will flash and the %miley lace" symbol will disappear.
Restart the DishDrawer after being paused.
You may notice a delay alter the Start/Pause has been pressed. During this
time the lid seal will be inflating.
One Button Start.
This starts the DishDrawer and will mn the last wash program used,
excluding Delay Start if used in the previous wash.
Initiates the Delay Start.
NOTE:
Under no circumstances do we recommend that you open the DishDrawer while in
operation unless you have pressedthe Start/Pause button. If the drawer is opened
during the wash program, thore is a possibility of getting wot, burnt, or damaging the
DishDrawer. Fhere are salk,ty mechanisms in place to stop the DishDrawer if it is
opened.
If Fault Code "U2" Appears:
The l_tult code "U2" will be displayed if the drawer is opened during operation. Fo
remove this lau[t code, press Power. Ensure the drawer is closed. The DishDrawer
will now be ready to start from the beginning of the wash program. You may have to
add more detergent in the dispenser and then press the Start/Pause button to start the
DishDrawer. The DishDrawer will not restart where itwas intem_pted alter a "U2" l_tult.
Lock
active until the Lock is deactivated.
To activate this iunction, press and hold the Lo_'kbutton
until the "key" symbol at the bottom of the Electronic
Display appears continuously and is no longer blinking.
All the other buttons are now inactive.
To deactivate this function, press and hold the Lock button
until the "key" symbol in the Electronic Display
disappears.
Figure 2 - Electronic
Display showing the lock
mode
Loading ...
Loading ...
Loading ...