Loading ...
Loading ...
Loading ...
9
Checklist Before Starting Pump Motor
Review the unit’s assembly to ensure you have performed all of
the following.
1. Be sure to read Operator Safety and Operation before using
the electric pressure washer.
2. Check for properly tightened hose connections.
3. Check to make sure there are no kinks, cuts, or damage to
hoses.
4. Provide a proper water supply at an adequate flow.
5. Plug electrical power cord into an electrical circuit rated for
120 Volts AC at 15 Amps that is properly installed in accordance
with all local codes and ordinances
NOTE The power supply must be 120 V, 60 Hz and a minimum
15 amp dedicated circuit.
Connect Wand and Spray Tip
5. Turn ON water, point gun in a safe direction, open trigger
lock small lever and squeeze trigger to purge pump system
of air and impurities.
6. Attach spray wand to spray gun. Tighten by hand.
7.Release trigger.
8. Choose spray tip you want to use, pull back on collar of spray
wand, insert spray tip and release collar. Tug on spray tip to
make sure it is securely in place. See How to Use Spray Tips,
page 12.
Loading ...
Loading ...
Loading ...