Loading ...
Loading ...
3
Important Safety Information
Please read and understand this entire manual before
attempting to assemble, operate or service the product.
Follow the maintenance instructions specified in this manual.
Safety Symbols and Meanings
Read Manual Electrical Shock Fire
Slippery Surface Fall Fluid Injection
Projectile Flying Objects Chemical Burn
Non-Potable Water
Never spray yourself, others, animals, power
sources, or the unit itself.
The safety alert symbol indicates a potential personal injury
hazard. A signal word (DANGER, WARNING, or CAUTION) is used
with the alert symbol to designate a degree or level of hazard
seriousness. A safety symbol may be used to represent the type
of hazard. The signal word NOTICE is used to address practices
not related to personal injury.
DANGER indicates a hazard which, if not avoided, will result
in death or serious injury.
WARNING indicates a hazard which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazard which, if not avoided, could
result in minor or moderate injury.
NOTICE indicates information considered important, but not
hazard-related.
Operator Safety
SAVE THESE INSTRUCTIONS
Equipment Description
WARNING Failure to read and follow the operator’s
manual and all operating instructions before using
could result in death or serious injury.
• Read this manual carefully and become familiar with
your electric pressure washer. Know its applications, its
limitations, and any hazards involved.
NOTICE The electric pressure washer is equipped with a main
power ON/OFF switch.
The switch should always be moved to the OFF position (0)
when the electric pressure washer is not being used to prevent
possible damage.
Motor Overload
The electric motor in this electric pressure washer is equipped
with an overload protection device (thermostat).
This device will automatically shut off the motor if the motor
overheats or draws excessive current.
If the overload protection device is tripped, disconnect the
power supply by turning the master ON/OFF switch to the OFF
(0) position.
Let unit cool for 30 minutes.
Then turn the master ON/OFF switch to the ON (I) position to
resume operation.
Extension Cords
Use only 3-wire extension cords that have 3-prong grounding-
type plugs and 3-pole cord connectors that accept the plug
from the product. Use only extension cords that are intended
for outdoor use. These extension cords are identified by a
marking "Acceptable for use with outdoor appliances; store
indoors while not in use." Use only extension cords having
an electrical rating not less than the rating of the product. Do
not use damaged extension cords. Examine extension cord
before using and replace if damaged. Do not abuse extension
cord and do not yank on any cord to disconnect. Keep
cord away from heat and sharp edges. Always disconnect
the extension cord from the receptacle before disconnecting
the product from the extension cord.
WARNING:
To reduce the risk of electrocution, keep all
connections dry and off the ground. Do not touch plug with
wet hands.
To avoid the possibility of the product plug or outlet getting
wet, the operator should arrange a “drip loop” in the cord
connecting the product to the outlet. The “drip loop” is that
part of the cord below the level of the outlet, or the connector
if an extension cord is used, to prevent water traveling along
the cord and coming in contact with the outlet
Loading ...
Loading ...
Loading ...