Loading ...
Loading ...
Loading ...
Press and hold CLEAR using a ballpoint pen
or similar object, then press the button you
want to clear for about 3 seconds.
"(':OK" appears in the display window if clearing
was successful.
/
"4;:
• If you continuously want to clear another ftmction, repeat
step 4.
• Once you clear a learned ftmction, the button reverts to the
f:actoW setting (or to the manuf:actttrer setting if you have
set remote control codes).
5 Press CLEAR to exit the clearing mode.
The remote control returns to the learning mode.
6 Press LEARN again to exit.
• "C:NG" appears in the display window if clearing was
unsuccessful. In this case. start over from step 4.
• "ERROR" appears in the display window if you press a button
not indicated in the respective step, or if you press more than
one button simultaneously.
• Clearing a macro function
You can clear the function programmed for a certain
macro button.
Set AMP/SOURCE/TV to AMP or SOURCE.
Press MACRO using a ballpoint pen or
similar object.
"MCR ?" appears in the display window.
If you do not complete each of the following steps within 30
seconds, the macro progranmling mode will be
antomatically canceled. In this case, press MACRO again.
Press and hold CLEAR using a ballpoint pen
or similar object, then press the macro
button you want to clear for about 3 seconds.
"C:OK" appears in the display window if clearing
was successful.
"*- ! 0ii
• If you continuously want to clear another function, repeat
step 3.
• Once you clear a programmed function, the button reverts
to the factory setting (or to the manufacturer setting if you
have set remote con_ol codes).
4 Press CLEAR to exit the clearing mode.
The remote control returns to the macro
programming mode.
5 Press MACRO again to exit.
• "C:NG" appears in the display window if clearing was
unsuccessful. In this case. start over from step 3.
• "ERROR" appears in the display window if you press a button
not indicated in the respective step, or if you press more than
one button sinmltaneously.
75
Loading ...
Loading ...
Loading ...