Loading ...
Loading ...
Loading ...
Press the buttons for the functions you want
to include in the macro operation in
sequence.
You can set up to 10 steps (10 functions). After you
have set 10 steps, "FULL" appears and the remote
control automatically exits the macro mode.
_ M®E _EEP
pHr_o(_ TUNE_Q__) rAutnemN(_
_R_eR_ DW
©©c)%
MCR 2: AV POWER
MCR 1: DVD
MCR 3: _>
You can clear all changes made in each function set, such
as learned functions, renamed source names and setup
remote control codes.
Set AMP/SOURCE/TV to AMP or SOURCE.
Press CLEAR by using a ballpoint pen or
similar object.
_CLEAR" appears in the display window.
Indicates the
number of macro
steps entered
l Flashes alternately so you canset the next step
• The macro operation may not work for a component
which takes time to start up.
• To change the selected somce component, press SELECT Ai
_. Pressing the inpnt selector buttons will program a macro
step, whereas SELECT Ai_ only changes tile selected
component and conesponding component cont!ol area.
Press MACRO again when the operation
sequence you want to program is complete.
"ERROR" appears in the display window if you press a
button not indicated in the respective step, or if you press
more than one button silnultaneously.
Memory back-up
If the remote control is without batteries for more than
2 minutes, or if exhausted batteries remain in the
remote control, the contents of the memory may be
cleared. If the memory is cleared, insert new batteries,
set up the remote control code(s) and program any
acquired functions that may have been cleared.
If you do not complete each of the following steps within 30
seconds, the clearing mode will be automatically canceled.
In this case. press (?LEAR again.
3 Press A / V to select the clear mode.
L:DVD (L: name of a component)
Clears all learned _imctions in the respective
component control area. Press an input selector
button to select the component.
L:AMP Clears all learned functions for this unit's control
area.
L:ALL Clears all learned functions.
M:ALL Clears all programmed macros
RNAME Clears all renanaed source names.
FCTRY Clears all remote functions and returns the remote
to the factory settings.
Press and hold CLEAR again for about 3
seconds.
'_WAIT" appears in the display window. If clearing
was successful, "C:OK" appears in the display
window.
°_ i:;!!iZ!!: !
Once you have cleared a learned fnnction for a button, the
button reverts to the factory setting (or to the manufacturer
setting, if you have set remote control codes).
"L:ALL" and "FCTRY" may take about 30 seconds to
complete.
73
Loading ...
Loading ...
Loading ...