Loading ...
Loading ...
Loading ...
• Connecting to an external amplifier
If you want to increase the power output to the speakers,
or want to use another amplifier, connect an external
amplifier to the PRE OUT jacks as follows.
• When audio pin plugs are connected to the PRE OUT jacks for
output to an external amplifier, it is not necessary to use the
corresponding SPEAKERS terminals. Set the volunle of the
external amplifier connected to this unit to the maxinmm.
• The signal output through the FRONT PRE OUT and CENTER
PRE OUT jacks are affected by the TONE CONTROL settings.
• If SPEAKERS A is turned offand SP B is set to ZONE B (see
page 64), signals will only be untput from the FRONT PRE
OUT jacks.
O ......
@ ............ O
_ROUND _aCK
O FRONT PRE OUT jacks
Front channel line output jacks.
O SURROUND PRE OUT jacks
Sun'ound channel line output jacks.
O SUBWOOFER PRE OUT jack
Connect a subwoofer with built-in amplifier, such as the
YAMAHA Active Servo Processing Subwoofer System,
to this jack.
0 SURROUND BACK/PRESENCE PRE OUT
jacks
Sun'ound back or presence channel line output jacks.
O CENTER PRE OUT jack
Center channel line output jack.
• Each PRE OUT jack outputs the same channel signal as the
corresponding speaker terminals. However, when both surround
back and presence speakers are setup in this unit, the signals
outpm from SURROL_rND BACK/PRESENCE PRE OUT jacks
may not correspond to the correct speakers.
• Actiust the volunae level of the subwoofer with the control on
the subwoofer. It is also possible to adjust the volmne level by
using the remote control (see "Manually ac[iusting speaker
levels" on page 51).
• Some signals may not be output _om the SUBWOOFER PRE
OUT jack depending on the SPEAKER SET (see page 55) and
LFEiBASS OUT (see page 56) settings.
22
Loading ...
Loading ...
Loading ...