Loading ...
Loading ...
Loading ...
[_: IIHroJAq
Do not connect this unit or other components to the mains
power until all connections between components are
complete.
• Cable indications
For analog signals
le_ analog cables _d_l
right analog cables _a_
For digital signals
optical cables _f[ o2'
coaxial cables ( c [7
For video signals
video cables _
S-video cables _Z_
• Analog jacks
You can input analog signals fi'om audio components by
connecting audio pin cables to the analog jacks on this
unit. Connect red plugs to the right jacks and white plugs
to the left jacks.
• Digital jacks
This unit has digital .jacks lbr direct transmission of digital
signals through either coaxial or fiber optic cables. You
can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. When you connect components to both
the COAXIAL and OPTICAL jacks, priority is given to
the input signals from the COAXIAL jack. All digital
input jacks are compatible with 96-kHz sampling digital
signals.
This unit handles digital and analog signals independently. Thus
audio signals input to the analog jacks are only onVput to the
analog OUT (REC)jacks. Likewise audio signals inpm to the
digital (OPTICAL or COAXIAL) jacks are only ontput to the
DIGITAL OUTPUT jacks.
Dust protection cap
Pull out the cap from the optical jack before you connect
the fiber optic cable. Do not discard the cap. When you are
not using the optical jack, be sure to put the cap back in
place. This cap protects the jack from dust.
• Video jacks
This unit has three types of video .jacks. Connection
depends on the availability of input jacks on your monitor.
The signals input through the S VIDEO jacks on this unit
are automatically converted for output through the
VIDEO jacks. When V CONV. is set to "ON" (see
page 63), signals input through the VIDEO jacks can be
output through the S VIDEO and COMPONENT VIDEO
jacks. Likewise, signals input through the S VIDEO jacks
can also be output through the COMPONENT VIDEO
jacks.
COMPONENTVIDEO
vmEo SVIDEO p_ p_ g
@ @ @©@
VIDEO jack
For conventional composite video signals.
S VIDEO jack
For S-video signals, separated into luminance (Y) and
color (C) video signals to achieve high-quality color
reproduction.
COMPONENT VIDEO jacks
For component signals, separated into luminance (Y) and
color difference (PB, PR) to provide the best quality in
picture reproduction.
_. ..................................................................................................... i
Signal flow inside this unit !
Output iI
Input (MONITOR OUT) i
S VIDEO
VIDE() ,,
"V\Nensignals are input tl_rough both the S VIDEO and VIDEO
jacks, signals input through the S VIDEO jack have priority.
17
Loading ...
Loading ...
Loading ...