Loading ...
Loading ...
Loading ...
25
The Air Bridge technology uses the cameras / IPC router as repeaters. This feature allow you
to boost the Wi-Fi signal using the camera / IPC router located near by the camera with weak
signal to boost & extend the range of Wi-Fi. This will increase the Wi-Fi range up to %150.
Air Bridge setup guide
Operation Steps:
1. Right click to bring up the main menu
and go to ‘Video Manage’
2. From the video manage please make
sure you have all the camera / router
connected and ready.
3. Click on the ‘Repeater’
4. Click ‘+’ right of the camera channel or
IPC router you will like to use it as
repeater, and select the channel you will
like to link to increase the signal.
For example, CH 2 & 3 have weak signal
which is located near the IPC router, and
the CH4 is located near the CH 1.
Therefore, CH 2 & 3 will be link to the
router, and the CH 4 will get link to the
CH 1.
5. Once you have click ‘Apply’ to save the
setting you can now click on the
‘Refresh’ and check the setting to make
sure it is configure correctly.
** Please allow 20~30 second after you
have apply the setting before you click on
the refresh. When you are done you can
see the increase of the signal rate for those
camera has been link using the air bridge
connection.
6. When you are done setting up the linear
connection you can exit the setup by
clicking ‘OK’ for repeater option, and
‘OK’ for video manage.
Loading ...
Loading ...
Loading ...