Loading ...
Loading ...
Loading ...
16
3.5 Antenna Mounting Tips
The NVR’s antennas radiate signals to all around. The signal pick-up is best while antennas
are on same height and parallel. If the cameras cannot be at the same height with NVR,
please keep their antennas parallel (up or down).
4. System Operation Introduction
4.1 Starting up
Note:
Please check the output voltage of the power adapter to make sure it is correct.
Unstable power source may cause unstable working status or even damage to the NVR
system. If you have unstable power source in your area, please use voltage-stabilized
power source.
Starting up the system:
1. Plug NVR to power, the power indicator on NVR front panel should light up and you’ll hear
a beep.
2. If monitor is getting video output from NVR, you should see the starting page as shown in
Image below. If you cannot see anything on the display please contact us at:
Loading ...
Loading ...
Loading ...