Loading ...
Loading ...
Loading ...
22
5.2.4 Auto Add
Function: Adding all of the cameras back
into the system in case the camera has
been deleted from the system, or after the
NVR firmware update.
Auto Add is different from the Match
Code. This function help you add the
camera to the system by reconfiguring the
IP address, however, it does not change
the connection type such as wire or
wireless.
When to use Auto Add:
When the camera is out of the Wi-Fi
range and want to connect the camera via hard wire connection.
After NVR system firmware upgrade.
Operation Steps
Configure the camera to work as wired connection:
1. Right click to bring up the main menu, and click ‘Video Manage’.
2. From the bottom chart select and delete the channel you will like to use it as wire
connection
3. Connect the NVR system to the router, and connect the camera to the same router
(network) as the NVR system using the Ethernet cable and click ‘Refresh’.
4. Once you see the camera at the top chart with the internal IP address (ex.
192.168.xxx.xxx) click ‘Auto Add’ > ‘Yes’ > ‘Yes’ to reconfigure the IP address and add it
to the system.
Re-adding all the cameras after NVR firmware upgrade:
1. Right click to bring up the main menu, and click ‘Video Manage’
2. From the ‘Video manage’ you will be able to see all of the cameras listed at the top chart.
If you do not see all the cameras listed please click ‘Refresh’.
3. With all the cameras showing click ‘Auto add’ > ‘Yes’ > ‘No’ to add the camera back into
the system without reconfiguring the IP address.
Loading ...
Loading ...
Loading ...